Replacing Your Ray-Ban Temples: A Step-by-Step Guide
Read Time:2 Minute, 56 Second
Ray-Ban sunglasses are some of the most iconic eyewear around. They’ve been a part of pop culture since as early as 1937 when Ray-Ban was created by Bausch & Lomb. Since then, they’ve become an essential part of fashion for men and women alike. However, even Ray-Ban sunglasses need to be replaced from time to time! If you find yourself in need of ray ban replacement temples on your favorite pair of shades, fear not. We’ve got everything you need right here at the bottom of this article!
How to Replace Ray-Ban Temples
Replacing your Ray-Ban temples is a fairly simple process that can be done in less than five minutes. Although there are many ways to go about this, we’ve chosen one method to help you easily replace your broken temple. Here are the steps:
Step 1: Remove Your old temples
To begin, remove the screws that hold your temples in place. These are usually found on either side of your sunglasses frame and are typically hidden behind stickers or other attachments that can be easily peeled off. Once you’ve removed all of these pieces, use a flathead screwdriver to gently pry open each temple piece. This should be relatively easy. If it’s not coming loose by hand alone, try using an old toothbrush or another thin implement to wedge between your temples and the rest of your glasses frames. Be careful not to force anything!
Once you’ve loosened up both temples enough so that they’re no longer connected at their ends (or as far as possible), use pliers or another gripping tool (like needle-nose pliers) to pull them off completely. Also, with oakley holbrook lenses, you may find that your temples have screws on them. If so, use the flathead screwdriver to loosen these and remove them completely.
Step 2: Slide on the New Temples
Slide each temple into place, making sure that it slides all the way back and locks into place. If you have trouble sliding the temples into place, check to make sure that they are facing inwards (towards your body) and not outwards (away from your body). This can be a little tricky at first, so be patient if you’re having trouble! You may also find that one temple slides in more smoothly than another, and that’s normal! Keep working until both temples slide securely into their respective slots.
Step 3: Adjust the Fit
Now that you’ve gotten a good idea of the material and style of your Ray-Ban temple, it’s time to take a closer look at the fit. Your Ray-Bans will be most comfortable if the temples fit well in place and don’t cause any discomfort. Make sure both sides are firmly in place by gently pressing them together at the nose bridge. If they’re not completely attached or have popped out of place during wear or cleaning, use pliers to move them back into position.
Next is adjusting how wide or narrow you want them to be: turn one end clockwise to tighten its grip; turn it counterclockwise to loosen it up and expand its length (or vice versa). Once they feel like they fit perfectly around your face without being too tight or loose. After checking for sharp edges or pieces that may irritate the skin. You’re ready for step four!
Conclusion
Replacing your Ray-Ban temple is easy and takes only a few minutes. With this guide, you’ll be able to get back on the road in no time!
0
0
Average Rating